A liner is essentially an open-top bag meant to be placed inside a tank or containment vessel. This type is common in upstream media preparation when a top-down paddle mixer is in use. A liner can be non-gusseted or gusseted. A non-gusseted liner welds two faces together on the sides and bottom while a gusseted liner will have extra support. Panel welded into the bottom of the bag for better conformance to the tank, and more structural support. APPL can produce both gusseted and non-gusseted liners.
# | Capacity | Dimensions(L*W*H) | |
---|---|---|---|
1 | 50L | 300 X 280 X 1000 mm | |
2 | 100L | 410 X 390 X 1100mm | |
3 | 200L | 470 X 490 X 1200 mm | |
4 | 300L | 500 X 520 X 1500mm | |
5 | 560L | 650 X 670 X 1500 mm |
Drawing | Description | Catalogue No. |
---|---|---|
2D Liner 50 ml | 2D-L-050M-0001 | |
2D Liner 250 ml | 2D-L-250M-0001 | |
2D Liner 500 ml | 2D-L-500M-0001 | |
2D Liner 1 L | 2D-L-001L-0001 | |
2D Liner 2 L | 2D-L-002L-0001 | |
2D Liner 5 L | 2D-L-005L-0001 | |
2D Liner 10 L | 2D-L-010L-0001 | |
2D Liner 20 L | 2D-L-020L-0001 | |
2D Liner 50 L | 2D-L-050L-0001 |
Drawing | Description | Catalogue No. |
---|---|---|
Port 1: PCS tube with 1/2" male insert and female plug | 3D-L-050L-0101 | |
Port 1: PCS tube with 1/2" end plug | 3D-L-050L-0102 | |
Liner without drain port | 3D-L-050L-0103 |
Drawing | Description | Catalogue No. |
---|---|---|
Port 1: PCS tube with 1/2" male insert and female plug | 3D-L-100L-0101 | |
Port 1: PCS tube with 1/2" end plug | 3D-L-100L-0102 | |
Liner without drain port | 3D-L-100L-0103 |
Drawing | Description | Catalogue No. |
---|---|---|
Port 1: PCS tube with 1/2" male insert and female plug | 3D-L-200L-0101 | |
Port 1: PCS tube with 1/2" end plug | 3D-L-200L-0102 | |
Liner without drain port | 3D-L-200L-0103 |
Drawing | Description | Catalogue No. |
---|---|---|
Port 1: PCS tube with 1/2" male insert and female plug | 3D-L-500L-0101 | |
Port 1: PCS tube with 1/2" end plug | 3D-L-500L-0102 | |
Liner without drain port | 3D-L-500L-0103 |